Theys, P. Turgis, Y Lepaurex, A Chevet, G Ceddaldi, P F. New Techniques for Bringing Out Latent Prints on Paper; Vacuum Metalization. Int Crim Pol Rev. 1968, V217, p106, pp3
Stroud, P.T. Some Comments on Finger Print Development by Vacuum Deposition,Nuclear Research Note 5/71, Atomic Weapons Establishment (AWRE), 1971
Hambley, D.S. The Physics of Vacuum Evaporation Development of Latent Fingerprints.PhD Thesis, The Royal Holloway College, University of London 1972
Further Comments on Finger Print Development by Vacuum Deposition, Nuclear Research Note 10/72, Atomic Weapons Establishment (AWRE), 1972
Thomas G L. Physical Methods Applied to Fingerprint Problems Proceedings of the Conference; The Science of Fingerprints 24th 25th Sept 1974, London , England.
Thomas, G.L. Physical Methods of Fingerprint Development Journal of the Canadian Forensic Science Society, 8:4 (1975)
Thomas G L., Kent, T. On the Use of Glow Discharge to Remove Contamination Prior to Fingerprint Development by Metal Deposition. HOPSDB Research Note 25/75
Kent T, Thomas G. L., East H W. Application of the Vacuum Metal Technique in the Development of latent fingerprints on Polythene. HOPSDB Tech Note 6/75
Kent, T., G.L. Thomas, T.E. Reynoldson, and H.W. East A Vacuum Coating Technique for the Development of Latent Fingerprints on Polythene. Journal of the Forensic Science Society, 16:93-101. 1976
Kent T, Gillet P C, Lee D. A Comparative Study of Three Techniques; Aluminum Powdering, Lead Powdering, Metal Deposition for the Development of Latent Prints on Polythene. HOPSDB Tech Note 6/78
Operational Trial Comparing Metal Deposition with Small Particle Reagent for the Development of Latent Prints on Polythene. HOPSDB Publication 12/84, Reprint of 16/79
Kent T. User Guide to the Metal Deposition Process for the Development of Latent Prints.HOPSDB Tech Note 24/82
Kent, Terry Recent Research on Superglue, Vacuum Metal Deposition and Fluorescence Examination Police Scientific Development Branch Report , July (1990)
Recent Research on Superglue, Vacuum Metal Deposition and Fluorescence Examinaton, Police Scientific Development Branch, Sandridge, UK 1990
Taroni, F., C.J. Lennard and P. Margot Latent Fingerprint Detection on Non-Porous Surfaces: Comparison...Metal Deposition and Cyanoacrylate Fuming International Association of Forensic Sciences, 12th Meeting, Adelaide, Australia (1990)
Murphy, M.P. A Vacuum Metal Identification. Journal of Forensic Identification, 41:318-320 1991
Misner, A.H. RCMP Latent Fingerprint Detection on Low Density Polyethylene Comparing Vacuum Metal Deposition to CA Fuming Fluorscence. Journal of Forensic Identification, 42:1, (1992)
Misner, A.H. Latent Fingerprint Detection. Comparing Vacuum Metal Deposition to CA Fuming. Journal of Forensic Identification, 42:1, (1992)
Zia, Secharia, Eliot Springer More Applications of Coaxial Illumination in Fingerprint Detecting and Photography Journal of Forensic Identification, 43:4, (1993)
A.H. Misner, Fingerprint Detection Using Vacuum Metal Deposition, Canadian Police Research Centre, TM-15-93, November 1993.
LeRoy, H. Metal Vacuum Deposition and Vacuum Cyanoacrylate Development of Latent Prints. In International Symposium on the Forensic Aspects of Latent Prints, FBI Academy, Quantico, Virginia 1993
Morris, Ronald N., Catherine L. Gilmour, Patrick L. Laturnus and A. Brian Yamshita. Vacuum Metal Deposition of Silver as an Aid in Credit Card Examinations. International Journal of Forensic Document Examiners, 1:4 (1995)
Gramt H., E. Springer, and Z. Ziv Vacuum Metal Deposition Inhibition on Polythene Bags.In Proceedings of the International Symposium on Fingerprint Detection and Identification, Israel National Police, Ne'urim, Israel, June 26-30, 1995, pp:203-215
Masters, Nancy E. and John D. DeHaan. Vacuum Metal Deposition and Cyanoacrylate Detection of Older Latent Prints Journal of Forensic Identification, 46:1 (1996)
AfterWords Article, Metal Deposition for Latent Print Development, Journal of Forensic Identification, 48 (2) 1998 / 165.
Flynn, J., Stoilovic, M., Lennard, C. “ Detection and Enhancement of Latent Fingerprints on Polymer Banknotes: A Preliminary Study. Journal of Forensic Identification, 1999, 594/49 (6).
A Vacuum Metal Identification. Journal of Forensic Identification, 72:35 2000
Jones N, Mansour D, Stoilovic M, Lennard C, Roux C. The influence of polymer type, print donor and age on the quality of fingerprints developed on plastic substrates using vacuum metal deposition. Forensic Sci. Int. 2001;124:167–177.
Jones, N., Stoilovic, M., Lennard, C., & Roux, C., "Vacuum Metal Deposition: Factors Affecting Normal and Reverse Development of Latent Fingerprints on Polyethylene Substrates". Forensic Science International, 2001, 115, 73-88.
Jones, N., Stoilovic, M., Lennard, C., & Roux, C., "Vacuum Metal Deposition: Developing Latent Fingerprints on Polyethylene Substrates after the Deposition of Excess Gold".Forensic Science International, 2001, 123, 5-12
Jones, N., Mansour, D., Stoilovic, M., Lennard, C., & Roux, C., "The Influence of Polymer Type, Print Donor and Age on the Quality of Fingerprints Developed on Plastic Substrates Using Vacuum Metal Deposition". Forensic Science International, 2001, 124, 167-177.
Vacuum Metal Deposition: Developing Latent Fingerprints on Polyethylene Substrates After the Deposition of Excess Gold. Forensic Science International, 123(1):5-12 2001
Suzuki, Shinichi, Yasuhiro Suzuki and Hikoto Ohta Detection of Latent Fingerprints on Newly Developed Substances Using the Vacuum Metal Deposition Method Journal of Forensic Identification, 52:5 (2002)
Jones, N. “Metal Deposition Techniques for the Detection and Enhancement of Latent Fingerpirnts on Semi-Porous Surfaces.” Ph.D. thesis, Department of Chemistry, Materials and Forensic Science Centre for Forensic Science, University of Technology Sydney, 2002.
Jones, N., Kelly, M., Stoilovic, M., Lennard, C., Roux, C., “The Development of Latent Fingerpirnts on Polymer Banknotes”. Journal of Forensic Identification, 50 / 53 (1), 2003.
Gossage, G., “The Effectiveness of Selected Metals in the Vacuum Metal Deposition Process for Developing Latent Fingerprints”. Thesis, Masters Degree of Science, California State University, Los Angeles, 2004.
Lyttle, S. Latent Fingerprint Detection on Cheques Using Vacuum Metal Deposition. Undergraduate Thesis, University of Toronta, Mississauga. 2005
Chapman, S. A Study into the Survivability, Development and Identification of Fingerprints from a Burial Environment Utilizing Vacuum Metal Deposition and the National Automated Fingerprint Identification System, IDENTI. Unpublished Masters of Science Dissertation, School of Conservation Sciences, Bournemouth University, 2006
Gunaratne, Adrian; Calvin Knaggs and ale Stansbury Vacuum Metal Deposition: Comparing Conventional Gold/Zinc VMD to Aluminum VMD. Identification Canada, 30:2 (2007)
Philipson, David, and Stephen Bleay Alternative Metal Processes for Vacuum Metal Deposition. Journal of Forensic Identification, 57(2):252-273 2007
Gunaratne, Adrian; Calvin Knaggs and ale Stansbury Vacuum Metal Deposition: Comparing Conventional Gold/Zinc VMD to Aluminum VMD. Identification Canada, 30:2 (2007)
Nic Daéid, Niamh; Stephanie Carter and Kenny Laing Comparison of Vacuum Metal Deposition and Powder Suspension for Recovery of Fingerprints on Wetted Nonporous Surfaces Journal of Forensic Identification, 58:5 (2008)
J. Fraser, et al., Visualization of Fingermarks and Grab Impressions on Fabrics. Part I Gold/Zinc Vacuum Metal Deposition, Forensic Science International (2010)